Buying a home in Canberra is one of the biggest financial decisions you’ll make. A home may look well maintained during an open inspection, but visible finishes do not always reveal movement in the structure, moisture behind walls or damage in concealed timber. A pre-purchase building inspection gives you a clearer view of the property's condition before you commit.
The short answer: Our pre-purchase inspection covers the roof and roof space, walls, floors and footings, subfloor, and internal and external building elements, plus a timber pest inspection for termites, borers and wood decay. Thermal imaging and photographs support the findings. It’s a visual inspection of safe, accessible areas, so it doesn’t test electrical, plumbing or approvals.
At CBR Property Inspections, our Canberra and ACT pre-purchase building inspection combines a structural building condition assessment with a timber pest inspection in one visit. The building component is assessed against AS 4349.1, while the pest component follows AS 4349.3. The inspection is carried out in person by a licensed builder, with thermal imaging used alongside the visual assessment.
What Is the Purpose of a Pre-Purchase Building Inspection?
A pre-purchase building inspection is an assessment of a property's visible and accessible condition at the time of inspection. Its purpose is to identify significant defects, assess the general condition of important building elements and give a prospective buyer useful information before exchanging contracts or completing a purchase.
It is not a guarantee that a property has no defects. Nor is it a substitute for every specialist check a property might need. It is a practical way to understand issues that may affect the building's structure, safety, maintenance needs or future repair costs.
The scope matters. In the ACT, CBR Property Inspections combines the building condition report and timber pest inspection, so buyers receive information about both structural concerns and timber pest activity.
1. Roof and Roof Space
The roof is exposed to weather and can develop problems that are not obvious from the ground. Where access is safe and available, the inspection considers the roof and accessible roof space as part of the property's condition assessment.
The inspector may look for visible signs of:
Deterioration or damage to accessible roof structures.
Movement, sagging or other changes that may indicate a structural concern.
Moisture staining or other signs that may point to water entry.
Defects around roof support elements that could affect the building.
A building condition inspection is not the same as a specialist roofing assessment. The inspection is limited by access and visibility, and it does not involve dismantling roof materials to expose concealed components.
2. Walls, Floors and Footings
Walls, floors and footings help support the building and transfer loads through the structure. Problems in these areas can affect stability, serviceability and the property's long-term condition.
The assessment considers visible evidence of movement, deterioration or damage. This can include cracking, distortion, uneven floors or other signs that may need closer attention. A crack does not automatically mean a serious structural problem. Its location, pattern, size and surrounding conditions all matter.
The inspection helps identify concerns that may warrant further investigation, such as an assessment by a structural engineer. It does not replace engineering calculations or a detailed design review.
3. Subfloor and Supporting Structures
Where a property has an accessible subfloor, this area can reveal issues that are difficult to notice from inside the home. Poor ventilation, moisture, damaged timber or deterioration around supports may affect the condition of the floor structure.
The inspector assesses accessible areas for visible signs of:
Deterioration or damage to timber components.
Moisture or damp conditions.
Movement or damage affecting supports and flooring.
Conditions that may contribute to timber pest activity.
Not every subfloor can be entered. Low clearance, stored items, insulation, services, debris or unsafe conditions may restrict access. Any limitation can affect what the inspector is able to see and report.
4. Internal and External Building Elements
An inspection also considers accessible parts of the property's interior and exterior. This helps build a broader picture of the building rather than focusing on a single crack or room.
Inside, the inspector may observe visible defects in walls, floors, ceilings and other building elements where they relate to the condition assessment. Outside, the assessment considers accessible external structural elements and visible signs of deterioration or damage.
The inspector records relevant findings and their locations. Buyers can then understand where a concern was identified and decide whether they need a specialist to investigate it further.
A standard building condition assessment is not a detailed review of every decorative finish, appliance or household fitting. It should not be treated as a complete test of plumbing, electrical systems or other specialist services.
5. Thermal Imaging for Hidden Moisture and Defects
We use thermal imaging alongside the visual inspection. A thermal camera detects surface temperature variations. These patterns can help identify areas that may be associated with moisture behind walls, missing or displaced insulation, or defects hidden beneath finished surfaces.
Thermal imaging is a useful supporting tool, but it does not see through walls or confirm the cause of a temperature difference on its own. A result may need to be considered alongside the visible condition of the area and other inspection findings. Where a concern needs confirmation, further testing or specialist investigation may be recommended.
This distinction is important: thermal imaging can help direct attention to a potential issue, but it is not a guarantee that every concealed defect will be found.
6. Timber Pest Inspection: Termites, Borers and Wood Decay
Our ACT pre-purchase inspection also includes a timber pest inspection. This is a separate part of the assessment from the structural building report and is carried out to AS 4349.3.
The pest inspection looks for evidence of timber pests, including:
Termites: signs of activity, damage or conditions that may support termite attack.
Borers: visible evidence of timber damage associated with borer activity.
Wood decay: timber deterioration that may be associated with moisture or decay.
The inspection also considers conditions that may attract or support timber pests. Depending on the property and what is safely accessible, the check can cover the interior, exterior, roof void and subfloor.
Ready to book? Our building and pest inspection covers the structure and timber pests in one visit, so you know what you’re buying before you sign or bid. If you are comparing the combined service with a standalone report, our building and pest report explains how the two components work together.
7. Photographs and the Inspection Report
The inspection findings are compiled into a written report. We support findings with photographs so you can see the location and context of each issue.
A useful report should help you understand:
What the inspector observed.
Where the issue is located.
Why the finding may matter to the property's condition.
Whether further assessment or specialist advice may be appropriate.
Most reports are delivered within 24 to 48 hours of the inspection. Allow time to read the report carefully and raise questions before your contractual or finance deadlines.
What Is Not Usually Covered by a Standard Building Inspection?
Understanding the limits is just as important as knowing what is included. A pre-purchase building inspection is generally a visual, non-invasive assessment of areas that are safe and reasonably accessible. The inspector does not normally cut into walls, lift fixed floor coverings or dismantle building components to inspect concealed spaces.
Depending on the inspection scope, the following may need separate assessment:
Electrical systems: a building inspection is not an electrical safety or compliance test.
Plumbing and drainage: specialist testing may be needed to assess concealed pipes, water pressure, drainage performance or leaks.
Pest treatment or invasive timber testing: a pest inspection identifies visible evidence and risk factors; treatment and destructive testing are separate services.
Approvals and compliance: a structural condition report does not confirm that every structure or alteration has planning or building approval.
Specialist engineering questions: significant movement or structural concerns may require an engineer's advice.
For ACT buyers who need a broader review, our Building, Pest and Compliance Report adds a compliance assessment to the structural and timber pest inspection. Confirm the scope required for the property before booking so the right report is arranged.
How Should You Prepare for the Inspection?
A few simple steps can help the inspection proceed efficiently and reduce avoidable access limits.
Arrange access. Confirm that the inspector can enter the property and reach relevant areas, including roof and subfloor access points where available.
Share known concerns. Tell the inspector about visible cracking, past leaks, repairs, extensions or other issues you want brought to their attention.
Provide relevant documents. Make available any building plans, renovation information, warranties or previous reports that may help explain the property's history.
Allow clear access. Where possible, move stored items that block access to inspection areas. Do not attempt to enter unsafe roof or subfloor spaces yourself.
Allow time to review the report. Build time into your purchase process to read the findings and arrange follow-up advice if needed.
Preparation does not expand the inspection into concealed or invasive testing, but it can help the inspector assess the areas that are available.
Why the Scope Matters Before You Buy
A property's presentation is only one part of the buying decision. A structural concern, moisture issue or sign of timber pest activity may affect the work required after settlement. Knowing about these issues earlier can help you ask informed questions, seek specialist advice and consider the likely cost and timing of repairs.
A pre-purchase inspection does not decide whether you should buy a property. It provides information to support your decision. Read the report alongside your contract, independent legal advice, finance conditions and any other checks relevant to the purchase.
Final Thoughts
A pre-purchase building inspection covers the property's accessible structural elements, including the roof, subfloor, walls, floors and footings. Our Canberra and ACT service also includes a timber pest inspection for termites, borers and wood decay, along with thermal imaging and photographic evidence.
The value of the inspection is the clearer picture it gives you before you commit. Understand what has been checked, note any access limitations and follow up on findings that need specialist advice. If you’re buying in Canberra or the wider ACT, book your building and pest inspection before you sign or bid. Book an inspection or call 0433729182
Frequently Asked Questions
Does a pre-purchase building inspection include a pest inspection?
Not every building inspection includes a pest inspection. Our ACT pre-purchase package combines a structural building condition report with a timber pest inspection covering termites, borers and wood decay.
What standard is used for a pre-purchase building inspection?
The building condition component of CBR Property Inspections' ACT service is assessed against AS 4349.1. The timber pest component is carried out to AS 4349.3.
Does the inspector check the roof and subfloor?
The roof and subfloor are included in the stated inspection scope. The inspector can assess areas that are safe and accessible. Access restrictions may limit what can be viewed.
Can a building inspection find problems hidden behind walls?
Thermal imaging can help identify temperature patterns that may indicate moisture, missing insulation or other concealed issues. It does not see through walls or confirm a defect by itself, and further investigation may be needed.
Is a pre-purchase building inspection a compliance certificate?
No. A building condition report assesses the property's condition. It does not confirm that all structures or alterations have the required approvals. A separate compliance assessment may be needed.
When will I receive the report?
Most reports are delivered within 24 to 48 hours after the inspection. Confirm timing when you book and allow enough time before your purchase deadlines.



Comments